190: Yoshizawa’s Sumo

| wonko

Considered by most to be the “father of modern origami“, Akira Yoshizawa created many artistic models and invented the system of diagramming we now use as standard. He also, it seems had a wonderful sense of humour:

This model is as much a character study as a comment on Japanese society, and I must admit to a giggle when I first found this model nestled near the back of Yoshizawa’s seminal work “Creative Origami”.

Initially, the model is folded asymmetrically, then as features emerge it is obvious this character is “fully equipped” and ready to rumble (although I was sure sumo usually wore some form of ceremonial “nappy” – for some reason Yoshizawa decided to omit that detail).

A simple fold that would benefit from thinner paper (the shoulders and neck were very difficult to fold with an A4 copy paper square). Quite cute however and I would imagine shocking in the day (but these days we would probably suggest steroid abuse will do that to a man 😛 )

189: Roller

| wonko

Now in posh car circles, a Rolls Royce is called a “Roller” – how do I know this? Well, I don’t, but that is what it is called on the telly. I am going driving today, so thought I would do it in style (at least in my head):

A tortured and fiddly design that hints at a sort of grandeur (notice the grille and fancy flaring of this boxy, limo-type body).

When I casually regarded this model I thought “yeah, that should only take a few minutes” but in reality it took me an age which meant I was late setting out for my long drive – I did not account for the poor diagramming and almost random steps half-way in or the annotations in colloquial French – you get that.

In truth, I would not really enjoy this sort of car – too frightened to drive it unless someone dinged it, unable to pay for servicing etc – I like my little zippy car that runs on the smell of an oily mechanic.

188: Edelweiss

| wonko

Now I am on the look out for effective flowers, and oddly Origami has lost of four-petaled ones (which in nature are fairly rare). this edelweiss caught my eye:

Made from a frog base and a deep sing, the bloom has a lovely symmetry about it and the stem works will together with it.

A simple fold, will try it out in colour als to see if it is effective – building up a repertoire of paper blooms soif I need to consider a bouquet at some time that is a possibility.

Why Edelweiss? 2 reasons – (1) Mum is home from the UK and it might be nice to give her flowers (awwww); and (2) I saw pictures of @Edelweiss – the dog owned by @jzagami and thought it so cute … yeah, I know, tissue thin justification but you get that.

Addendum: Made some light lilac blooms on 2 colours of green stems – they stack you see – noice, unusual, different – I hope my mum loiks them 😛

Six Months Revisited

| wonko

So it is a little way into the seventh month of this 365 day odyssey and my son wanted to lay out a full six month’s worth of models … well, because he could really – who am I to argue:

I must admit to getting a little dizzy looking at this mass of paper and time. It took an hour to lay out (a little longer to put away) and each model is an amazing slice of my life:

So much paper, I have enjoyed it so far, hope you are hanging in there as there are lots of hoopy folds to come.

187: Spiral Box

| wonko

Looking at the plethora of boxes I still have to fold, it is difficult to select just one. I chose this spiral box because the spiral on the lid is echoed in the construction of the bottom:

A rectangular box (as opposed to square) that cleverly tucks away flaps inside itself to make a sturdy and tidy construction

Quite happy with this one, fairly simple to fold and lots of fold landmarks once you get past the fifths.

186: Teddy Bear

| wonko

I once had a friend that could comfort me when I was sad, that I told all my secrets to, that kept me company when the lights went out, that never complained or criticised me, that joined in on all my adventures, that I loved completely and unconditionally. This is Ted, my bear:

So a friend of my wife is having a baby – what better to welcome the little one into the world than a bear:

So I have had this design for ages and wanted to try it out. Scale was important, as I was going to mount it on cardstock with some double-sided tape, the height is 1/3 the original square size, so … easy. After performing my “first fold” on an A3 cut square of copy paper, I then fashioned a 26cm square out of brown paper from the baking drawer in our kitchen for his little brown brother.

A fairly difficult fold to complete with copy paper – thicknesses make subtle details clumsy. Surprisingly, brown paper (you know, the stuff you line cake tins with) folds beautifully – is strong and thin, must remember that.

I like how the finished model has character – I have now folded a few of these and each one has it’s own unique posture and facial expression – a lot like real teddy bears I think.

You may collectively go awwwwwww now 😛

185: Bald Eagle for July 4th

| wonko

After abandoning a search for a decent “statue of liberty” model, I decided to settle on an American Bald Eagle as a symbol of independence, what the 4th July is celebrated for in the US:

After looking around, I settled on a figurative bald eagle by Robert Lang from “The Complete Book of Origami” and happy with many aspects of this fold.

Difficult to complete with copy paper, the thickness and brittle nature of copy paper means that several steps are likely to distress the paper severely and the body thickness makes shaping late in the fold difficult – quite happy with this as a first fold. I added pleats on teh wings to suggest feathers as I thought the wings needed it, and modded the talons a little to make them less clumsy.

Should I fold this again, I now know what becomes what and so would approach some of the steps a little differently, but living/folding is learning – right?

184: An Alpaca

| wonko

I thought I would try something simpler, so found what looked like a mostly harmless little Llama model designed by Jim Adams:

On paper, this model was straight forward – in practice however the thickness of layers at the tail end made this model impossible to fold using copy paper (I tried, breaking one of my own rules, it exploded – well, split and the tail broke off, so I started again) so I used a square of tissue foil – even then the tail was too thick to be elegant, pity – the diagram makes it look crisp and slender. I guess if one used large format foil it might be easier – not sure the overall model proportions warrant that treatment however.

Some interesting applications of sink, crimp and double-rabbit ears – it suggested double rabbit-earing the rear legs – already needle thin, I merely reverse folded them and think that is a better result. Pity they are so thick else I would have added hooves also.

Although it is diagrammed as a Llama, I think it is more like an Alpaca (mostly because I wanted to use “an” in the title and “An Llama” does not seem right – yeah, I know, tissue thin reasoning there but you get that)

183: Hummingbird Feeding

| wonko

I have the greatest of respect for Robert Lang, his models are discussed mathematically and with great artistic intent also, and when I saw this hummingbird in “Origami Design Secrets” I knew I had to make it:

Having never actually seen a hummingbird (except on the telly), I am amazed and in awe of their size, industry and life habit. After folding the bird I decided it absolutely needed a flower to feed from, found a simple blossom in Harbin’s “Origami 2” by Toshie Takahama and fixed them together with the wire from a straightened paperclip and a (shhh) little double-sided tape.

Hummingbirds use huge amounts of energy to fly, and so feed voraciously on high-energy foods like nectar, so I can imagine my little bird about to plunge into the nectary of this flower for a much needed energy boost.

Am really pleased with this model – beautiful beak, breast and wings, the tail was a surprise as it came from a tortured sink early on. A masterful design that, from what I can gather, captures the intent of the bird mid flight. this makes it difficult to pose (as it has no legs) and, interestingly, every picture I have seen of this completed model is posed adjacent a bloom (presumably using the same support trick I used.

You may, collectively, go awwwwww now, as that was my reaction when stepping back from the handiwork.

182: Canadian Bull Moose

| wonko

Now I was told it was Canada Day on July 1 by Peter and Jen, and they kindly asked me to fold them a moose (after seeing a picture of the finished model on google) … if it was not too much trouble.

Fortunately i had a copy of “Origami Design Secrets” by Robert Lang, which has this as a penultimate box pleating example (typical a mathematician would take the simple art of box pleating to this length), so I thought “why not, can’t be that difficult” – lol.

Now I had some “tissue foil” I had shipped from the origami shop, and was itching to try it out to see how it takes folds. I must admit it is different to what I thought it would be – this is cotton-based, metallic thread impregnated opalescent paper is not a paper and foil sandwich, so will keep looking for a supplier.

Wow, no I mean WOW! – what a difference good paper makes on the fold process – no splits, tears, paper fatigue (except on the folder). I am impressed given the length of this paper torture session and the lengths to which the square was crimped, distorted, pleated, reversed and teased. I began to realise this model was epic after nearly 2 hours of PRE FOLDING was necessary before the first collapse – at one points folding 64ths along one edge – thank goodness for large format paper.

I started this at about 8am – after a bowl of Porridge (with maple syrup – it is CANADA DAY remember) and finished the fold prior to photographing the posed model at 12:45pm!!! 3 cups of tea, 2 panadol and 3 albums of Lawrence English sound art and it is done.

HAPPY CANADA DAY Peter and Jen – thanks for the challenge.

June, Done and Dusted

| wonko

Now where did that half of a year go – I cannot believe we are at the end of June already – it is fascinating how you notice the passing when you are tasked with something every day:

Some amazing models again this month, and now I am almost on the downhill stretch I am looking for interesting models to fold – i have no shortage of candidates but am trying to avoid simple things or familiar ones – for the most part i have folded stuff so far that I had not folded before – all good experience.

I am a little concerned that my storage box may not be big enough – 6 months of models almost fill it:

181: Piglet

| wonko

I have a lot of pig models, all have their charms – it is interesting that it is a much-folded animal:

This figurative model is quite a simple fold, a nice change of pace on a busy day

An interesting twist on the waterbomb base, it’s body proportions are ok, it has a good snout that could be further modeled as there is lots of paper there, and a fab curly tail.

180: Rocking Horse

| wonko

Now I have been a customer of Rocking Horse records in Brizvegus for as long as I can remember – they stock an important mix of local releases, electronica, avant-garde, metal, obscure and dance music ephemera that appeals to me.

They are in trouble – difficult to compete with torrents and copyright theft (I know many young people who have never purchased music ever, but have iPods full of the stuff). I decided to visit today, purchase a bit but sadly everything is on sale – not a good sign. Today’s model is a rocking horse:

This little model actually rocks also, very tidy (if torture to get all the paper inside the body and leave the rockers largely fold free so they, well, rock…

I like the body proportions – very horsey – and the weight distribution is also good – very well designed model by Ronald Koh (the same guy who designed the King Cobra)

Precision was important here, and a little luck – many of the folds were judgment calls, no landmarks are trickey if you have not folded a model before and do not know what ends up where.

Happy with my first fold, fingers crossed that a good record store can survive – brissie would not be the same with out it.

179: Goanna

| wonko

Now I have been looking for a good lizard – sounds like a personal problem I know, but it is hard to get something with the right morphology (proportion and placement of body parts):

This model comes close – a torturous thing in parts that comes together with the most lovely legs (toes and all) and a sculpty tail – not sure about the head though, there is plenty of paper but a goanna typically has a much longer neck (although this model does have the beginnings of a lovely forked tongue also)

An interesting use of a hexaonal base and some lovely sinks and collapses – I could see this base as a useful starting point for a crocodile, as there is plenty of paper doen the back to crimp up some lovely bumpy bits. I think there were some inaccuracies in the diagramming, as the initial folding of the toes, according to diagrammed landmarks was less successful, but minor adjustments sort that out.

When I fold this again I think the resultant critter will be much better shaped, now I know what is going to end up where – still, an interesting fold.

You can try this for yourself: http://zingman.com/origami/oriPics/lizard2/lizard_diagrams.swf

178: Scuba Steve

| wonko

Now I was watching this stop motion animation by Sipho Mabona, and saw a humanoid emerge from a sheet of paper, so began doodling with a square of parchment not really having any plan. Oddly a figure emerged with what looked (to me at least initially) like a shell on his back.

Immediately I thought of “Teenage Mutant Ninja Turtles” but my son said version 1 looked a lot like a skindiver (he has diving qualifications so I was not going to argue).

Surprisingly, I was able to fold it a second time and discovered a bunch of paper that was useable for a facemask, a nice 3d head, was able to fashion a pair of airtanks of his back and some lovely flippers and…

“Scuba Steve” now lives – I have NO IDEA where i got the name from, but depressingly when I googled it it seems associated with an Adam Sandler movle – my bad. The name stuck.

I am actually pretty proud of this model – i knew where I was going and, without reference to anything else I have folded (well, maybe the arms and legs are influenced by the Hoodie) I think this is pretty neat.

A PADI AOW diver in Florida offered to professionally diagram it for me (which is kind of cool, we shall see if that results in anything – he is a renowned origami author, fingers crossed).

Here is an interim set of instructions: scubasteve (PDF)

Addendum: Version 4 has been submitted to OrigamiUSA and 4Esquinas (the Latin American Origami Society) also seem interested in publishing it – we shall see. Interestingly because it has already been mentioned online, Creased magazine does not want to touch it – curious but fair enough.