2hrs

404: Joisel’s Bandonéon

| wonko

I first noticed this lovely little fold nestled amongst the masterpiece that is Eric Joisel’s Musicians, and decided that i must try to work out how to make it:

Now the “purists” amongst you will recognise this as a “Concertina”, but that is splitting hairs, given a “Bandonéon” is square, this is clearly hexagonal, but I digress.

Presenting a tantalising hand-drawn crease pattern idea on his memorial website, I decided to try and work out a method for this fold.

Unlike the original, my design is based on a 32 x 20 grid, making an extra gather in the bellows section (which is not a bad thing) and a simpler join along the long seam (which, sadly, I still needed to use double-sided tape to close).

The geometry of this model is really nice – the bellows almost fold themselves when the creases are laid in – I experimented with the seam in and thought it looked better with the strappy seams out in the bellows.

fashioning handles at the end happens quite naturally if you have been neat, and folding it without any extra creases is possible if you concentrate, making the presentation fold very tidy indeed.

I have folded many of these, they are lovely and, now I have a handle on the scaling factors and geometry there is a knack to making them that is quite easy to pick up.

On the same hand-drawn crease pattern, there is another that supposedly makes a saxophone – might give that a whirl as I seem to be in a musical instrument frame of mind at the moment. very happy with this one however, and need to move on from it.

399: Golden Snitch

| wonko

Exploring an Origami Tanteidan Convention book I came upon a model designed by Peter Farina I just had to try:

Being an out and proud Harry Potter fan, I know that the golden snitch is an essential component of any game of Quidditch, this one is a beauty.

Essentially using overlaying fan-pleats, you create the wings and enough paper to tease and shape round to make the body. Initially, my test fold was done in white paper and I found I had to be very careful (copy paper is so brittle) not to tear/split it – the middle section gets really damaged. Continue reading →

391: Pierre Mâché en Francais

| wonko

….Puis je vous présenter Monsier Pierre Mâché, my first internationally folded gnome:

20120422-101343.jpg
You see, we are currently in Paris, on a vacation that has been in the planning stages for years, and we had an astonishing meal at a local restaurant Les Enfants Perdus, and I noticed they topped their tables with a square of sueded cream colored paper.

20120422-163405.jpg
In my best French, I asked pour Le paper sur la table and they gave me a fresh one to fold. The paper was stiff but really strong, so I was able to model this guy a lot more than I usually can, or maybe I am just getting better.

20120422-101808.jpg
I like how his posture worked out, he definitely looks French and is gesturing as if to express exasperation that he cannot understand us odd Australians, we get that a lot.

20120422-101932.jpg
We will leave him as a gift to our hosts here in Paris, the apartment we have rented from them is wonderful, very well appointed, comfortable and essential to us keeping going each busy day.

Au revoir Paris, our first visit has been magical

20120422-102137.jpg

388: The Lion King

| wonko

…now many of you know I am travelling overseas real soon. Whilst in London, we decided to take our pick of shows playing at London’s West End, and decided on “The Lion King”:

I then got part way through the fold and posed a development shot on Fakebook for people to try and guess what the model would end up as. I am pleased to say that Janet C was the successful guesser.

This model is lovely – a real mask, folded with a larger bit of paper it would be a person-sized thingy, neato with design details. Designed by Victoria Serova (with instructions in Russian which made it an interesting challenge), it has a lovely 3D muzzle, sleepy feline eyes and potential for modelling a lovely mane.

Next time I fold this I think I will rough up the mane a little, still, very happy with this as a first fold.

384: Squiffy “Woombye” Larch

| wonko

Ladies and Gentlefolk, may I introduce young Squiffy Larch, “Woombye” to his friends:

During a mad weekend, we visited Woombye Pub for a fantastic lunch and I noticed they put on their square tables, a beautiful big square of brown paper.

Naturally I put 2 and 2 together and got 7, and decided it needed to be folded into a gnome, and Squiffy was born.

The paper is amazing, takes folds well, is tough and the resultant gnome is the largest I have folded so far.

Quite happy with the face, he has a lovely grin amongst a full beard, noble nose and a quaint, slightly sozzled look in his eyes. His hands were crying out for something drink-related so I invented a beer stein and all was good.

Will organise to send Squiffy to Woombye – he belongs in a bar. He is very happy (that will be the pint he is working on) to be joining the ranks of the “other” seven dwarfs.

378: Be My Valentine

| wonko

So today is Valentines Day, and rather than buy into that commercial thing, I thought a more personal touch was required:

Using 4 2×1 rectangles, some tight pleating and curling, and some florist’s wire to keep them together we have some rather lovely roses.

I happened to have some lustrous red metallic paper from a “going out of business” craft store sale and it does look rather pretty. I also fashioned some calyxes out of a dark green stock paper to complete the look (and hide the wire twist).

Fiddly but shapely, and a little cheaty (the wire and a dob of tarzan’s grip to keep the calyx up) but all is fair in love and paper folding, right? I must investigate some foliage to fill out the arrangement. She liked them, that was the main thing <3

373: Mermaid

| wonko

When I first saw this pattern, I thought “oh no, more cobra pleating” and relegated it to the “not before counselling” pile:

At the moment the weather is wet, hot and the humidty is such that you could cut it with a knife and I got to thinking who would be at home in this sort of weather – the answer was obvious, a mermaid.

I have some offcuts of lithography paper, they just so happen to be as near as anything to 2×1, so this model works well on them – mind you, at this scale, the tail pleating is close to as fine as I can actually do with that paper – folding 24ths down to 4mm is not fun and the paper did not like it, humidity not helping at all.

In the end, we have a lovely figurative mermaid – slightly fishy, lovely flowing hair, hand modestly covering ample bosom and calm face. Her posture suggested reclining – I believe they “moon-bake”, not sure where I got that from but anyway I made a rock for her to luxuriate on and it sort of works.

I learned a lot folding this for the first time, and will probably fold it again, I think I can improve the upper body a little – we shall see. Happy with the result none the less. You would get a decent fillet off her I would guess – the other other other white meat?

The instructions (well, actually a fairly rough folding guide actually) were in French, with odd proprietary annotations but it was fairly obvious what was going where from the outset – ingenious and not dissimilar to something I was working on myself but abandoned because it got busy last year.

post-script: In talking to Eric Vigier on Facebook, he had this to say:

Yes it’s mine , and you’re right in your comment : “odd proprietary annotations” but for my defence it’s my first diag , made at hands in 2002, i’m always happy to see that I drew it for something , so thank you ! For the story, I met Eric Joisel in 2002, we became friends and met regulary at his home at this time and when he saw my mermaid he said me that he would like to do one since a certain time , so I gave him my diag and the result is the magnificent mermaid you try actually , that is the sharing way i like to see in the Origami world !”

How wonderful is this Internet-encircled world I ask you?

371: Mortimer Greenoak

| wonko

Ladies and Gentlemen, may I introduce Master Mortimer Greenoak Esq. A young but not inexperienced forest dwarf who has a particular talent with timber:

This lovely fellow is destined for greater things but I am thrilled with him, my second Eric Joisel-inspired dwarf.

It was hot, I needed to get out of the house for a couple of hours so took a large square of paper and the ourPAD to out local library and sat, and folded. Interestingly I also conversed with complete strangers who gathered to watch the paper mangling – they were interested and I was relaxed enough to explain what I was attempting.

In the end, I made Morty slimmer and so made him look younger, and played around with the face a bit – another step closer to mastering the face, will keep at it. he is quite tidy apart from his beaten up face – I ended up modelling a pendulous nose and pushed out his cheekbones to suggest eyes under the brim of his hat. Quite happy with the beard and mouth though.

His posture called for a walking stick, and I envisaged a base that would allow him to be displayed easily. The name? It just seemed to work, and references his eventual owner in interesting ways.

He is not free-standing, I do not know how to make them so (the ankles and feat are so thin that they defy attempts to support the weight above. All versions of this model I have seen are plastered with methyl cellulose (apparently the Origamist’s goop of choice) but I think that is cheating a little.

Determined to solve the display issue, I cut a rectangle of timber (shock, horror, I picked up a SAW), covered it with the same paper he was made from (the sheet off-cut actually), drilled a small hole nearly all the way through and then made a wire brace that fits inside him neatly and exits down one leg, so he is pose-able now. I added a bent paper clip amongst the folds of his elbow to keep it bent – it kept wanting to straighten because of the thickness of layers there – all acceptable cheats I think for the longevity of the model.

362: Young Buck

| wonko

Amongst the plethora of models I still have not yet tried, there are some beauties:

This is Roman Diaz’s Deer and it is a lovely specimen indeed. 10 points on his antlers, proud stance and a spring in his step.

This model, though lovely, was a cow to fold – hand drawn instructions that were not to scale, step 41 I missed altogether, which caused no end of peril and a re-fold (so sue me).

In the end this is fantastic – you get a real sense of the animal, the proportions and stance feel quite natural, the ingenious mangling to get enough points for the antlers amazing and the wrangling to get the majority of the paper tucked away to reveal the body nothing short of breathtaking.

Diaz has a unique style, this model features closed sinks in abundance (quite difficult to do well) and so provided me with some valuable practice.

339: Lang’s Scorpion

| wonko

To Quote Michaelangelo

Every block of stone has a statue inside it and it is the task of the sculptor to discover it.

Extrapolating, every sheet has an origami figure in it – the tricky part of super-complex models is to fold away all but that figure:

This is Robert Lang’s Scorpion, folded from “Origami Insects II” and it was a fascinating exercise in managing paper fatigue indeed.

An astonishing set of mathematical and geometric constructions were necessary to find reference points before the base was folded, then collapses, accordion pleats and some seriously sharly tucking away results is a remarkably shapely arachnid (8 legs + claws + a curvey, stingy tail).

I am so chuffed to actually finish these instructions, considered abandoning it twice, had to get up and make a cup of tea twice during it’s genesis. Small inaccuracies compound – a half a millimetre here results in half a centimetre out of alignment later on, so I tried to be as careful as my fat clumsy fingers would let me be.

In the end, a 60ish cm square collapses down into a lovely little 18cm model. I only had a tiny bit of paper fatigue right on the last step (typical) when attempting the final tail curl through 30+ layers of paper – it really did not want to bend – you get that.

Lithography paper is strong and fairly resilient, but it is still a little thick for this model – not sure how I acquire thinner/stronger paper as I want to fold more complex things – might try brown paper, I have a nice wide roll of that, will see how it goes.

334: The DEVIL is in the DETAIL

| wonko

I have grown to respect a number of designers of all nationalities and Fernando Gilgado from Spain is one who is guaranteed to produce a challenging model:

This is the Demon, and the devil in the details, trust me – his head alone is frightening – 2 sets of horns, beard, snarly mouth, eyes etc. His body is very dense, arms and legs 20+ layers of paper but that bunching results in the most splendid wings and a pointy demonic tail.

This instruction set was a real challenge – apart from folding it during school time (in between end of year report checking and tidying up), the instructions were in Spanish, and some aspects of it were very fiddly indeed. Even at 54cm x 54 cm, the head and facial features were too small to fold tidily, still, as a first fold I am very pleased with this. It is a monster, wing span of nearly 30cm and he looks very menacing – in a cutey sort of way.

I thought the “angels” of yesterday needed some “demons” today to bring some sort of balance to the paper cosmos. A suitable end of my second last month of this challenge.

333: Nativity

| wonko

Away in a manger, no crib for a bed …

This is Ligia Montoya’s set of models collectively known as “The Creche”. Folded today for possible inclusion in the end of year massy thing for staff this Friday.

This amazing collection of models, all designed around the same figurative human base is to scale, uncluttered and has a lovely feel to it. Continue reading →

317: Fiery Dragon

| wonko

As a DnD fanatacist, I am always on the look out for a good Dragon – Kade Chan’s Fiery Dragon is one such beastie:

Having loved folding Chan’s “Werewolf” I have had this model in the “must do” pile for months.

WOW – to take an A3-cut square and twist it to this degree and get such a lovely result with no paper fatigue demonstrates the brilliant design here – the body is so thick, wings so tortured, tail so tight, head so detailed that any of these features could have meant the paper split asunder but no.

Coaxing copy paper through tricksey folds is beginning to be an obsession of mine – I have no doubt that many of these folds would be easier with more robust paper but … well … where is the challenge, right?

From all angles, this little beauty is 100% dragon and I will fold this again. If you look carefully he even has eyes. Potter fans will probably label this a “Horntail” or “Ridgeback” dragon, because we are knowledgeable about such things also 😛

Mastery of the square is something Kade Chan is known for, economy of fold and attention to media are the hallmarks of a talented designer. I feel honoured to have folded this one.

303: Llopio’s Moment of Truth

| wonko

The croud erupts spontaneously with “Olé!” as Llopio narrowly dodges the bull calf’s first charge. His grandfather’s matador cap, too loose for him, slips and obscures his vision, there is an amateur swish of a cape as the bull’s developing horns pass too close for comfort, quick step out of the way and Llopio is finally a bullfighter.

This is “Llopio’s Moment of truth” – the reason I bought the British Origami Society’s compendium of Neal Elias figures. There is much to like in this complex box pleat. from one piece of paper emerges a Matador, Bull and the Cape that separates them.

I like how there is movement, you can sense the drama, a fitting end to my exploration of Neal Elias’ work. This fold is challenging, so much of the design is “mystery meat” where you just have to sort of “improvise” – you would not want to fold it much smaller, the manipulation of layers in the bodies is intense and fiddly and it is not immediately obvious what is going to be what until near the end.

Interestingly, only the matador is box pleated – unusually you torture 2 water bomb bases to get the bull and cape so this is a nice fusion between pure box pleating and free-form sculpture. Happy I have folded this, apparently if you fold it with duo paper the cape ends up being the alternate colour – wow.

302: Pereira’s Jack In The Box

| wonko

If you were ever after proof that “magic happens”, here’s your proof:

This masterpiece of design by Hugo Pereira is a Jack-in-a-box, complete. those who have been keeping up with this blog will remember a previous Jack in the Box by Max Hulme and I must admit I like this one better.

The design engineering alone in this model is breathtaking, from the box to the spring and then to the jack, the details here are lovely and structurally amazing.

So many technical elements here, from intense closed-sinks, folds that cause automatic puckers in the spring and just when you think you are near the end a tight pair of accordion folds to make the arms in almost Elias style.

I am so stoked with this, as a first fold. After an hour of pre-folding, the actual collapse took relatively little time considering the complexity of the model. I had relegated this model the “yeah, prolly not” pile because it just looked too hard – indeed, some of the manoeuvres only make sense if you look before, after and what that part will eventually be used for.

Sense of achievement – tick 🙂