square

1099: Songbird

| wonko

To mark the release of Phạm Hoàng Tuấn’s new book, he released a photo sequence of a little songbird on Fakebook:

Hundreds of development photos lead you (sort of) through the exacting process of folding this little wren-like bird. I decided to throw some nice paper at it.

The suggested size the author used was 20cm, so I went 35cm square, thinking I would have been safe, but should have looked ahead as it got waaaay too thick due to layers really quickly. Not to be deterred, I thought I would try to shepherd the now clearly wrong paper through a torturous fold,

In the end, some features (like the head) were really clumsily folded due to thickness, but I am pretty happy with the number of bird-like features I was able to tease out of this lovely sheet. I was also reminded of an important lesson – choice of appropriate paper is REALLY important on complex-supercomplex models.

I posed and stabilised it as much as possible, and will prolly fold it again some other time. The photo sequence was super annoying to use – it kept timing out (google drives get lazy) and so many of the photos showed indeterminate actions at times I was left scratching my head thinking “what is actually being shown here”. Beggars cannot be choosers however, so I gave it a red hot crack.

Continue reading →

1098: Dumb and Dumber

| wonko

I love a clever conceptual fold, and “Emptyhead” designed by Boice Wong (origamibyboice) is a clever example of art designed to make you think:

The first of these models – “Emptyhead I” is a lovely character that has an empty box sitting on his shoulders for a head. This model, uses a variation of the original CP (crease pattern), and represents his dumber brother completely detaching his head from his shoulders.

The original, as folded by Boice, has a solid cube for a head, but I Macgyvered a scheme to make it an open 2x2x2 cube instead, so he is clearly related to his more sensible brother.

From a 32 grid, this model cleverly presents shoes, cuffed pants, dress shirt, tie, collar, overcoat with lapels, 1 regular arm and one extra long arm, part of which becomes the box head. Such a neat design, the paper cleans itself up and provides wraps to make the seams tidy on the arms also. All this with no cuts, folds only. I did resort to using a few white glue spots to keep seams and layers in place, but tried to keep it as au-naturel as it was possible while being able to pose him for archival purposes.

I must admit to obsessing about this version, having solved the CP for the first version fairly quickly (which really surprised me if I am honest). I just assumed this version would let me make the free box head, but as I discovered, turning the long pleated tube into an open-ended box, when there was so little paper was a major issue.

Continue reading →

1097: Jetlag

| wonko

Those who know me realise I am just back from nearly 7 weeks in Europe. When asked how my jetlag is going, it is difficult to put the answer into words:

Spending so long in a different time zone, and getting good at waking early, being on the go to many and varied locations, then being subjected to 29ish hours transit to return to the other side of the planet is always a struggle, but this time it seems to have been worse. Bouts of fatigue followed by being wide awake at 3:30am are exhausting, as is my numb and seemingly empty brain.

This is my test fold of a new Boice Wong design. Boice is a crazy talented origami designer who released 2 versions of this model while I was overseas. He graciously released the CPs (crease patterns) and … they did not look too hard … but have taken nearly a week to decipher with my head in it’s current state.

Entitled “Empty Head 32×32 grid”, this is the first of 2 models in this series I intend to try, and feel a little guilty using up a blog number on the test fold, but I am so happy with how this little guy turned out I thought why not. When I have both figures, I will post again using a new blog number.

Continue reading →

1095: A Wing and a Prayer

| wonko

Having just treated my first 2 bits of Wenzhou paper, I was itching to fold something (and running out of time to do so). I decided on a Praying Mantis, designed by Jo Nakashima model that I have not yet folded:

Jo Nakashima's Praying Mantis

Based on a 40 grid, using fairly standard box-pleating tricks, this model is a lot of fun to fold. Jo helpfully provides diagrams that detail how to efficiently and accurately lay in the crease pattern (check it out here) and in doing so I learned a LOT about treated wenzhou: It is deliciously thin, crisp and really strong (it allowed me to bugger up a collapse 2 times before getting it right, without paper fatigue). One thing I did not expect was it’s relatively poor reversibility – ie. you fold in one direction and then turn it accurately inside out. I was expecting it to be easier to reverse.

Jo Nakashima's Praying Mantis Views

Instead of “parachuting” (apparently a CP solve no no), I used the central axis and formed the head, thorax and as a consequence formed the front 2 pairs of legs. The abdomen collapse is fascinating and bends back under the wings making it really tidy all round.

Continue reading →

1094: Travel Fold 2023

| wonko

One of many habits I have developed, when travelling, is to “art bomb” the places we stay:

Jo Nakashima's Kangaroo

I take origami paper on holiday (like, who doesn’t, right?) and like to hide a finished cute model somewhere in our accommodation, restaurant, ferry, funicular or whatever for either the owner or a subsequent guest to discover – meant as a nice little surprise.

As an Australian, I try to include aussie flora or fauna, and memorize the fold.

Jo Nakashima's Kangaroo scale

If I am to be completely honest, I am astonished I have never folded Jo Nakashima’s “Kangaroo” before. It is a little charmer. I have a pack of indigo Tuttle paper that will be perfect for this, so it is sorted (apart from the practice needed to fold it from fading memory).

You too can fold along with me – Jump here for video and diagram tutorial

1093: “An Origami Journey”

| wonko

Avid noticers of this blog will realise that, since 2011, I have been rapidly expanding my abilities as a folder. Like most people, my first ever origami experience (apart from largely unsuccessful paper planes) was an origami crane (Tsuru) – taught to me as a boy of 11 yrs by a Japanese exchange student. A few years back I completed my task of learning how to fold Satoshi Kamiya’s “Ryujin 3.5”. This fold is not unrelated to both events:

Brandon Wong's "An Origami Journey"

Crane to complete Eastern Dragon is quite a journey, learning all sorts of new techniques and refining skills along the way and this fold celebrates that very journey. Originally designed and folded by Brandon Wong (@ThePlantPsychologist) – I first saw his fold on Instagram, and then photos of it on OrigamiDan (a discord server I am a member of) and vowed, one day, to fold it.

Brandon very kindly published the Crease Pattern along with photos of his fold, and right now I am rapidly learning to solve crease patterns so the perfect storm emerged after retiring I have time to tackle more ambitious folds.

Brandon Wong's "An Origami Journey" 360 view

After gridding the 90cm square, I set about laying in the exacting additional creases needed, including a puzzling pythagorean hinge line and some baffling level-shifters. Collapsing was a …. process. Apparently I “parachuted” the model – starting at the edges and working towards a bulging centre is termed parachuting (which is something I must address) until it more or less sat flat. After checking in with Brandon (isn’t the internet amazing) he suggested a fix for the only collapse kludge I had on his right shoulder.

Continue reading →

1092: Riccardo Foschi’s “Frog/Toad”

| wonko

Few origami designers design, present and then release CPs, diagrams and tutorials for their work like Riccardo Foschi:

When I saw his newly designed frog 2 days ago, I was hoping for there to be a tutorial or CO soon, his tutorial dropped yesterday and I knew I had to fold it.

I used a square of Duo Thai paper – dark and lime green and folded it slowly to enjoy the demonstrated process.

The front end of this frog/toad is wonderful – big whimsical eyes, beautiful suckered feet, nice shaped head. My only criticism is that the back legs and bum are a little stubby – there is quite a bit of paper back there that is not doing a lot, but as is it is simplistic. None the less, I love this little chap.

Continue reading →

1089: Caiman

| wonko

A caiman is an alligatorid belonging to the subfamily Caimaninae, one of two primary lineages within the Alligatoridae family, the other being alligators:

Caiman

When is a Crocodile not a crocodile – when it is an alligator, apparently.

This model has taken me an age for a number of reasons. The model, a genius design from Jeong Jae II (taken from the book “Origami Pro 6 – Wild Amazonia”) has over 300 diagrammed steps (worse, many are “repeat x-y, in reverse upside down”) and every part of the square is worked, then re-worked in many and exacting ways. I wanted to understand and enjoy the processes I was performing and some of them took time to do precisely.

Not rushing to “set” a crease is an important tenet here – until the crease is set there is still time to change it, once set it is permanent damage to the sheet – I tried really hard to set the creases in the correct place.

Caiman views

Scaled/pleated models always fascinate me – the design strategy behind HOW these are designed are completely beyond my comprehension – pleats and scales take a LOT of paper, so planning what is done and where is exacting. Following the set of instructions is complex enough but there are some who could fold this monster from a crease pattern (CP) alone – but not by me – that still is beyond my ability.

A quality design looks good with folds alone – and when I had laid in all the creases and roughly shaped it, the model was already wonderful. I did a little bit of cleanup – closing gaping seams with spots of glue, closing the underside of the tail to give it volume and wires in the legs for permanent posing. Remarkably little was needed to make this presentable.

Continue reading →

1087: Scout

| wonko

Browsing my pile of Tanteidan magazines, as you do, I noticed a model labelled “wolf” that I thought was more typical of a collie dog:

Scout

A lovely complex fold that, although uniaxial, seems to hold itself together and self-stands without assistance. The management of the bi-colour features is also interesting, suggesting the feathers and white patches of a certain young and enthusiastic collie called “Scout”.

The head shape contains a lot of “judgement” folds that change the shape of the nose, jowels etc so I think I could, with some planning, get a better defined collie head, but I am pretty happy with my first fold.

Continue reading →

1086: Happy New Year (Year of the Rabbit)

| wonko

Proofing manuscripts that are soon to become Origami books is an interesting (and sometimes intense) business. While looking at a recent draft, I happened upon Nguyễn Tiến Kha’s lovely new “Lapin (Rabbit)” design and new I needed to test-fold it:

Phạm Hoàng Hải's rabbit

This is an intense fold – it eats up so much paper (I folded this little lovely from a 45cm square), but in the end we get a lovely bi-colour rabbit with all its bits in the right place, good proportions (although a little “top heavy”) and (with a little bum surgery) self-standing.

There are lots of origami rabbits, I have folded most of them, and this one is a charmer for a bunch of reasons. The fold sequence is ingenious, intense and really reliant of accuracy early – lots of pre-creasing provides good landmarks later on, and some lovely emergent geometry as you turn things inside out, round and about.

Continue reading →

1084: Square Spaceness

| wonko

I have a huge pile of “must get around to folding this” models and “Square Spaceness” designed by Alessandra Lamio is one of this legion:

1084: Square Spaceness - plan view

Take a square, divide it into a 16×16 grid, lay in strategic mountain and valleys and you get this almost Escher-like tessellation molecule (meaning you _could_ put multiples of these if you had a more expansive grid with some tweaks and a bit of smush).

Charged with the confidence Advent of Tess gave me, I knew it was time to give this a whirl. There are many long slight diagonal valleys that make up the bulk of the geometry for the inward sloping spirals, and the corner widget is ingenious as a lock, and adjusting the outside pleats lets it sit flat – love it.

1084: Square Spaceness - diamond view
Continue reading →

1083: Bodo’s Whale

| wonko

Cruising the socials, I noticed origamist Bodo Haag gifted newly drawn diagrams for a rather splendid whale, and I knew I needed to fold it:

Utilising the back and front colours of the sheet, we have a nicely white tummy and a dark back and tail fluke.

I had a lovely bit of wrapping paper (thx Rachel) and knew it would be lovely folded as something, and as a decorative ocean-going mammal it is perfect.

Continue reading →

1080: Invention of the Crane

| wonko

This is a very personal fold, as well as a lovely meta design:

Boice Wong's "Invention of the Crane"

The first thing most people learn when they start out in Origami is the traditional crane. This fold speculates the genesis of this model as a happenstance some time back in the mists of time. Interestingly, the first model I was taught, as an 11 year old, by a Japanese exchange student, was the crane.

Designed by Boice Wong, released as a crease pattern, I was decided to give it a whirl. If I am honest, I am not really happy with my first fold, and will probably attempt it again (having learned heaps in the folding). The CP can be found here: https://www.obb.design/cp#iocrane

Using a single square, no cuts, we have a lady in a traditional kimono, kneeling in front of a low table on which there is a single crane. The genius of this design is the model is complete – it looks finished all the way around (indeed I fashioned a lovely “bow” Obe at her back. There is a colour change making the table/crane a different colour to the girl (I decided the focus of this fold was the crane, so it ended up white – next time I might just paint it, or perform an additional colour change which is possible with this design but results in a clumsier crane I think).

Boice Wong's "Invention of the Crane" Views

This has taken me an age. Initially, I attempted to collapse the base only to discover it was inside-out, then trying to sort out what flaps did what job (kinda aided by sorta advice from Boice himself), and decided on the current flap assignment when trying to ascertain how to compose the kimono and hide the internal layers, yet still give me the hair fringe. Quite a wrestle in the end.

Continue reading →

1079: Neelesh Kumar’s “Experience”

| wonko

All too rarely does an origami fold feel autobiographical, but when I first saw the CP and published fold of Neelesh Kumar’s “Experience”, I knew I needed to try it:

1079: Neelesh Kumar's "Wisdom"

From a SINGLE uncut square we have 2 separate fully formed characters – an elderly wizened “know it all” and a youngster at the beginning of a large book he is holding. The clever narrative thread is that they are connected by the the beard that morphs into the book.

1079: Neelesh Kumar's "Wisdom" - OLD

“Experience” is many things to many people: knowing when to shut the fuck up and when to assert your opinion, a willingness to pass on what you know, knowing what you do not know, knowing what to say when.

1079: Neelesh Kumar's "Wisdom" YOUNG

This clever boxpleat is one of many NK specialises in, and I am not sure i have done it justice, but the character of the model asserted itself in the folding process so I went with the flow.

I struggled with the whole transition between characters, and initially completely forgot the collapse that formed the book, needing to un-do the little person almost completely before doing the book crenellation. Based on a 40×40 grid, the face of the elder was feature-rich, but the face of the younger very plain – I sort of muddled along, thinking the concept was as important as the detail.

Continue reading →

1078: “Tallneck” from Horizon

| wonko

There is a series of games in the Horizon series, set in a dystopian future where main opponents are robotic dinosaurs. My son plays, I am amazed by the complexity and richness of the game world.

I saw an origami “doodle” by Tetsuya Gotani of a “Tallneck” published on his instagram feed – a sort of brachiosaurus with a spaceship for a head. Thanks to the power of the internet, I reached out to see if he could give me guidance on how to fold one:

Tetsuyu Gotani's "Tallneck"

After a while, Tetsuya replied with a diagram series on how to fold it, newly drawn for me to test-fold. How amazing is that???

I hope he publishes the diagrams, the fold is challenging and the result is familiar to many gamers, and I am sure there would be interest from other origamists (and gamers) to fold it. The Horizon series of games has many robotic dinosaurs that would be perfect subjects for super-complex origami designs (hint hint!).

in-game image

I started with a 40cm square of metallic green/black duo paper (I think it was shadowfold??), that was really thin but strong (it needed to be, because of the torture and final torsion of the outer layers over a bulky solid body. Characteristic of the game critter, spikey bits and a flat-top head emerge from deft manipulation of layers. The bulk of the paper lies in the neck, making thinning it difficult, and the resultant model has a neck that is a little too thick, compared to the slender game critter’s – but this is a minor quibble.

Continue reading →