S Kamiya

962: Ryu Jin 2.1 – Head

| wonko

In a bid to calm down and relax after a brutal week at work, I took a 60cm square of red/natural Ikea Kraft paper and started folding… and folded, and folded and folded.

Ryujui 1.2 head

I have been lured back into the fold (as it were) of Ryu Jin folders (nerds who attempt to fold Satoshi Kamiya’s devilishly difficult dragon series). Having already folded a 1.0, 1.2 and 3.5, I noticed that I had never attempted a 2.1.

Ryujui 1.2 head views and detail

For the uninitiated, the numbers indicate refinements, with the 1.0 being vaguely dragon like and the 3.5 (the culmination of this design process) being the most astonishingly detailed design imaginable.

Continue reading →

961: Drogon, The Black Dragon

| wonko

The lure of Satoshi Kamiya’s Dragon set is alluring. Recently I was invited into a community that celebrates the RyuJin series. Having folded a 1.0 and a 3.5, I thought it time to fold another:

Drogo, Satoshi Kamiya's RyuJin 1.2

This is the 1.2 – a refinement of the 1.0 and I had fun shaping the head as per a guide by Daniel Brown – a luscious and generously shared photodiagram set that I really enjoyed following.

My 1.2 is actually based on almost an identical crease pattern to the 1.0 I folded back in 2013, but back then I had NO IDEA how to shape it, and sort of made up shit as I went along.

Continue reading →

903: (353/365) Slippery Little Sucker

| wonko

I must admit to being a bit of a fanboy when it comes to the works of Satoshi Kamiya. His designs are genius, fabulously complicated to fold and make good use of the sheet:

This is his Octopus – an amazing fold from an octagon that yields lovely little legs, a beady set of eyes and a pendulous 3D head/body with a modicum of paper torture. Continue reading →

Morning Light with Dragon Head

| wonko

Revisiting a fold I achieved 3 years ago, I was struck with the dramatic lighting caused by an accidental reflection on our wooden floor and resultant shadow:

You know when you see something amazing and cannot quite believe it was you who made it? I seem to be surrounded with such moments.

821: (271/365) Satoshi Kamiya’s Ant

| wonko

After re-subscribing to JOAS, in record time my back-issues of the Tanteidan magazine arrived and along with one of them, a really challenging diagram:

About 170 steps, extreme paper torture and, as a project, something truly terrifying but I knew I needed to try it. Continue reading →

709: (159/365) Satoshi Kamiya’s Tsuru Rose

| wonko

I am nothing if not determined at times. This  model has beaten me many times but, due to a perfect storm it seemed to just happen in my hands:

This is Satoshi Kamiya’s “Tsuru Rose” – an odd but beautiful combination of a Kawasaki rose twist in the body segment of a traditional Tsuru. Continue reading →

549: Fluffy the Cerberus

| wonko

Fans of Harry Potter will recognised “Fluffy” the 3-headed dog, Hagrid’s pet (oops, just outed myself as a Potter nerd).549cerberus

This is Satoshi Kamiya’s “Cerberus”, a rendition of a mythical beast that is an amazing design that in the end is really really fiddly.

Continue reading →

505: Dragonfly

| wonko

As part of my JOAS membership, I get sent magazines with models to try – a really excellent collection of complex models from the worlds best designers. When I saw Satoshi Kamiya’s Dragonfly, I was really scared of it.505DragonFlyThe level of pleat management and re-arrangement of flaps and layers is truly terrifying when viewed as a whole.

As a “treat”, to reward my marking progress (I am a teacher, I set assessment but hate marking it) I allowed myself to complete a couple of steps each sitting. This fold has taken place over the period of 3 weeks, a little at a time. the advantage of this method is that I did not get freaked out by what was to come, just concentrating on the couple of steps I was allowed to complete. Continue reading →

Copper Dragon

| wonko

As you may have guessed from subsequent posts, I have been learning to fold Satoshi Kamiya’s Ryujin 3.5:copperDragon

After a year of lessons, learning bits of the model and patiently/painstakingly working on each of the elements of the design, I managed to combine all onto one model. Continue reading →

496: Satoshi Kamiya’s Ryujin 3.5

| wonko

On March 21, 2014, I began a quest to learn how to fold Satoshi Kamiya’s “Ryujin 3.5”, and was lucky enough to be accepted as a pupil of Mr Daniel Brown (MrOrigami).496SigmundRyu

Daniel sent me a lesson, I had to perform the illustrated tasks and photo my evidence back to him before he sent me the next lesson. The process has been fascinating, frustrating, amazing, annoying, hard, humbling, wild and wonderful.496SigmundRyuViews

A year on, I have managed to integrate all the component lessons into the one sheet (well, 2 halves joined at a seam inside) to arrive at this amazing model. It has yet to be fine-shaped – a task that will have to wait until marking and an extended holiday are over, but at least I know that all the creases are now in place, the bits are all where they should be and the beast is something I am unbearably proud of. Continue reading →

… there be Dragons!

| wonko

For much of the past year (2014) I have been learning how to fold Satoshi Kamiya’s Ryujin 3.5, as taught to me via a series of lessons cunningly devised by Daniel Brown (Mr Origami). I started this project on March 21.

This is Part 3 of a series that also includes Part 1, Part 2

Lesson 18 was folding the head in isolation – I must admit that even when searching for photos on how the head of this beast should end up, none really make it clear. What is clear however is that there is a terrifying amount of detail.headviews1

Following photodiagrams (in 3 phases 18a, 18b, 18c), I ended up with a beautiful thing that is my take on how a eastern dragon head should look. Continue reading →

Ryujin 3.5 (continued)

| wonko

After much care and attention, diligently following expert lessons (courtesy of MrOrigami’s Daniel Brown), I have managed to successfully navigate lessons 1-11 in what promises to be an ever intensifying journey towards understanding the whole model. This is PART 2 of a previous post. Part 3 also exists.

Along the way I have learned a LOT about myself – patience is it’s own reward. If at first you do not succeed, try, try and try again (something I needed to do for lesson 11 – which I folded 4 times until I got it right, each attempt taking me 12ish hours)

tryagainsml

I can see why Satoshi Kamiya (the astonishingly talented designer) has not folded lots of these – the detail (and there is LOTS of details here, most you cannot see) needed to let the paper sit correctly whilst transitioning between elements is breaking my brain.

So far, I have learned elements of the design in isolation:PatternLessons1-11

The lessons after this appear to tackle larger and more complex chunks – the aim to get all pieces to co-exist on the same sheet.

Interestingly, although it is time consuming, I am finding the process fascinating, each piece gains a sort of momentum that propels me on to finish it and get it right, and I look forward to the next part with a sort of morbid curiosity.

I bought some WIDE Kraft online (90cmx30m) and, depending how it behaves, intend to laminate 2 strips together to make a square nearly 2m x 2m as my first attempt of the whole model – no idea if that will be big enough, we shall see.

The Lessons continue. Continue reading →

477: Rooster

| wonko

I want an origami rooster (in red) to live somewhere in our new kitchen, so set about exploring rooster form with a pair of masters and their individual approaches to rooster form:

I “warmed up” with an Eric Joisel “Le Coq” – a fold I had tried years ago and not really mastered so I patiently and carefully folded from a 60cm square a lovely rendition (well, in my eyes at least). the Joisel model is economical with paper and seems to focus on the feet and tail, with an almost caricature head comb and waffle.

I then, after a cup of tea, girded my loins and set about folding Satoshi Kamiya’s Rooster. Using the same size piece of paper, there are hundreds of steps, many of which were astonishingly complicated 3d collapses that had originally scared me away from trying it – indeed 2 years ago I would not have been able to fold it at all.

There is much to admire with Kamiya’s vision of the bird – body and head with comb/wattle are amazing,  full wings and a suggestion of a tail are wonderful, legs and feet seem (to me at least) almost an after thought, although the legs do have spurs and the right number of toes, I found them less generous than they needed to be for the proportions of the model – the poor chook would not be able to walk or perch. Even posing it I had great difficulty propping it up on the little spindly toes. It appears to have “barbie” syndrome – you know, Barbie the doll has impossible proportions, right? Continue reading →

Ryujin 3.5 Lessons from a Master

| wonko

I am honored to have been allowed to learn how to fold Satoshi Kamiya’s  Ryujin 3.5 by an extraordinarily talented folder who goes under the name “MrOrigami”.

When finished, it should look like this:

He sends me lessons, I must complete them neatly and photo-evidence back to him before he sends me the next lessons.

This blog post chronicles my progress so far. It is a long and winding road towards folding the whole thing from one square of paper – that road consists of a myriad of skills, techniques and components all designed to tuck away 70%+ of the sheet revealing just the dragonny bits.

The Crease Pattern is terrifying (but if you look closely you can see head, body in 2 sections, claws and tail … well, I can):

I hope I am skillful enough to learn how to fold it … we shall see. Explore PART 2 of this project. Continue reading →

446: Sunny’s Giraffe

| wonko

Sunny’s birthday is coming up and she loves Giraffes:

In browsing for a suitable model, I discovered a Tanteidan containing a Satoshi Kamiya giraffe that I had not folded, so it seems it was meant to be.

I lke this model a lot – it is full of the essential giraffe features, economically uses the sheet and contains some wonderfully complicated folds. Continue reading →