I am always looking for folding (and prograstigami) projects, my friends often )helpfully) suggest I “fold the washing” – my question to this is always “into what?”:
This lovely little colour change model is in the latest Tanteidan Magazine (one of many advantages of being a member of JOAS.
Designed by Motoo Ohguchi, I decided to punish a lovely 21cm square of Shibori duo paper, and set about the exacting divisions, colour reversals and smoke and mirrors that form the shape and details.
The layers get really dense, so thin paper (or going large) are solutions – I tried it on 15cm Kami and struggled to shape the collar and other details at this scale and thickness.
An invitation went out on Fakebook to join a “fold along” session with Fergus Currie and, although it was after 11pm local time I thought why not:
Fergus taught the module then construction of a 4-part modular Frustum (a truncated pyramid) – an ingenius and “frustrating” model in that the lock between modules is accomplished using a “latch crimp” tab inside the bent gusset pocket, making the actual construction a little fiddly.
I found I needed to ease the 3rd and 4th modules in place using long-nosed tweezers, when it sits right it locks tight but requires a bit of a controlled jiggle to get it to be seated just right. The final module is a bit of a challenge to insert without dislocating the two either side of it.
Patience and tweezers finally won over and the top half finally was locked tight and tidy, then a simple weave on the bottom flaps complete a lovely truncated pyramid. Material thickness is an issue here – the tab-pocket system assumes material of negligible thickness. If you use heavier paper you need to fractionally adjust either the pocket depth or the tab length – fortunately there are a couple of fold junctures that make this easier.
Anyone who owns a lawn realises it is a constant battle to keep it mowed, tidy, healthy and weed free. In a tropical climate like ours, doubly so:
So we have a dandelion problem – hundreds of the little buggers pop their flowers up after I mow and I am loathed to resort to spraying them, chemical solutions are my last resort. I googled the problem and found a no-bend weeding prong that seems custom built to pluck the little suckers root and all.
We ordered 2 (a his and hers set) on the off chance we both would want to do this, the arrived in pieces and after a simple set of instructions they were assembled, ready to go. In our first session on the lawn we easily filled a large bucket with extracted dandelions and realised this was a solution, albeit manual and long term.
In the latest Tanteidan magazine, by pure synchronicity, there were diagrams for a modular dandelion designed by Toshikazu Kawasaki. I set about folding the pieces and, after a fairly simple set of instructions, the dandelion was assembled and ready to go.
To celebrate the release of his lovely new book of modular polyhedra (must get me one), Fergus Currie offered an early morning (for me at least on the opposite side of the planet) workshop on how to fold his second stellation of a cuboctahedron:
I set an alarm, awoke at 1am and folded along with Fergus.
I like this modular a LOT – each vertex is a single piece of paper – it works well with paper that has only one side printed or printer paper. The design is ingenius, the angles odd and exacting but you get into a groove and they make sense in the end.
I went into production line, and using the template to establish the initial odd division, I found that using a fine ball stylus and ruler it was easier to lay in the intermediate creases with the accuracy to make the vertices crisp and accurate.
Once I had 24 units, I then interlocked them in groups of 3 using the narrow tabs and pockets – these interlock really tightly and I could not imagine trying to do these later. I then joined the triples as they tile on longer tab-pocket sets that slide together with a little encouragement. Eventually the units combine to become this wonderful spikey ball with unique geometry.
Clocking on for another round of procrastigami, I decided to give the first of the “twister” series a go:
Twister A – 2×2 molecules
This is “Twister A”, designed by Ilan Garibi, a lovely dimensional fold with a final twist to finish it off.
I have folded a few square twists, this one perches a twist on top of the intersection of opposing ridges, contains remarkably few folds on top of the base square grid.
Twister A Single Molecule
The basic molecule tiles awkwardly – because of the directionality (it forms in a clockwise direction) of the molecule, you have to reverse adjacent molecules if you want them to line up.
Exploring Ilan Garibi’s lovely book “Origami Tessellations for Everybody”, the next “family” of folds starts off with “Childhood” and then evolves into more of the same:
Childhood-Evolved (4×4 molecules)
This is almost a corrugation, as there are nearly no layers overlaying others – the surface treatment is deliciously dimensional, and the distortions are caused by paper tension and torsion of the underlying square-twists.
“Childhood” molecule
I started with standard cotton-based photocopy paper (which for me is a LOT like thin Elephant Hide) and laid in a square grid. Both childhood and childhood-evolved use off divisions. I folded a regular division (halves or thirds), then halved until I was close to the required grid sizes, then sliced off unneeded units before laying in the wedge-shaped mountain creases.
Looking for something to de-stress and unwind to after a brutal term, I turned to “The Works of Satoshi Kamiya II”, and a model that I was astonished to find I had never tried – his hermit crab:
Starting with a 70cm square of natural/white Kraft paper, the fold was challenging as you allocate one side of the sheet to the crab, the other to the shell. Via a fabulous fold sequence, you tease legs, claws, antennae, eyes and mouthparts while delicately colour-changing the rear and then spiralling a shell as his home.
This is, (der), genius design – I always am amazed with Kamiya designs, and the elegance of the developmental sequence – as if the journey is every bit as delightful as the destination.
When a legend graciously shares hand-drawn diagrams for a lovely simple Eastern Dragon, one simply has to give it a go:
This is an “Eastern Dragon” – interestingly most people in the west believe you need to staple wings on such a critter so that it can fly. Our eastern cousins accept that this sort of critter can fly, wings are not necessary for this activity.
This design was recently shared, luscious hand-drawn diagrams from @brianchandesigns, a gracious and fabulous gift to the origami community.
My Mum had a large carpet snake take up residence atop her hot water system. Apparently he (she? who can tell?) was gentle, sleepy and knocked off some terracotta plant pots in his quest for a coil-spot:
Over a period of a couple of weeks, he moved about, basking, slithering and generally being a snek, then he buggered off (as they do).
A group of mates has, periodically over the last few decades, gotten together in a smoke-filled room to play a board game. Not any old game, but “Dogfight” – a dice-based, card controlled WW1 battle of the airspace over Europe.
Although most of the players were well passed their fifties, we squabbled like little kids, goaded each other fearlessly, preened and peacocked at our prowess and got nit-picky about the many nuances of rule variations hard won.
It was honestly some of the best fun to be had, and the chaps were good sports, one and all. In January, one of our quartet passed away. “Dr Winston O’Boogie” (Michael) flew off into the sunset for the last time to great fanfare.
We have met since, dragging a young buck into the fold, and played until Michael’s house (the home of our epic aerial battles) was finally sold.
Tonight is our last hurrah!
I have struggled to find a suitable way to celebrate such a wonderful partnership, but turned to Origami, as is my want. I wanted to fold BIPLANES for the original pilots, and a smaller plane for the new recruit, and have really struggled with these models. The Biplanes are designed by Marc Kirschenbaum. I wanted to fold them smaller but failed many times, only being able to manage them from 60cm squares (and not very tidily sadly) – red, naturally in honour of Von Richtoffen (or Snoopy, take your pick).
The smaller plane is “Avioneta” designed by Eduardo Clemente – a charming little fokker.
I hope the guys like them. I remain forever grateful for the opportunity to act like little kids when surrounded by the wonder and majesty of imagination, fun and friendship. Chocks away Chuck, fly true one and all.
I am a firm believer that people learn something important when they try to do something they are not good at. I have recently bought a Theremin, and I want to pretend that I am anything but not good at playing it, but, like, it is hard to master:
I noticed that a Theremin has a distinctive shape: an upright antenna that you use to control pitch (the high-lowness of a note), and a horizontal antenna loop you use to control volume. To my (not so great) surprise, I discovered that no one had yet done an origami model for this thing, so set about having a go.
I started with the fish base, long flap for the pitch antenna, long flap for the stand, then 2 shorter flaps become the volume loop. Some accordion pleating and the basic morphology is there. You can (I hope) see the development in the sequence below:
It is a start, I might try to refine it (add knobs, refine the antennae, etc). Happy with v1.
I have discovered I a very low tolerance of boredom, I neeeeeed to be doing something most of the time. When my students are doing assignment work I make myself available for consultancy and need tasks I can drop in an instant so I can help them – origami is often my goto:
This is a re-fold, but I like it more than my first fold. I chose 5 sections (that together become a 10:1 proportion rectangle) for ease of transport during the folding process. White/natural Kraft paper (23cm on the narrow), and some care and attention to accuracy. This little beauty is the result.
It is rare to see happy dragons – they usually are trying to be ferrocious and scary – this dragon reminds me of a puppy, a mischevious ball of energy that is waiting for you to throw the drool and scorchmark-covered stick again.
Origami designer Fergus Curry shared with me the diagrams for his Rhombic Triacontahedon, I was determined to give it a try:
30 squares in 5 colours, some clever unit folding later and I had the bits needed to construct this little gem. A positive tab-pocket mechanism, some strategic placement of colours and pretty soon you have a lovely sphere made of rhombi. [edit]: A friend (JZag) pointed out this is a D30 (DnD reference there) – nice and nerdy.
A few years back, I was gifted a portfolio of amazing vintage paisley paper by the Albions. I have held back folding it until I found something that would do it justice:
I pulled a sheet (there are over a dozen different paisleys in the folio), it opened up into a large sheet that I derived a way of dividing it into 30 equal squares – the basis on this kusudama.
This is a stellated dodecahedron, with lovely ridges, pentagonal faces and a wonderfully tactile design. 30 modules, based on 60 degree division, wonderfully deep pockets and positive lock, initially it is easy to put together. You can have a go yourself: https://www.youtube.com/watch?v=MzeQBFay8NY
Mum had Basset hounds when we were kids – wondrously preposterous dogs with twice as much skin as any dog needs, rediculously long ears and a bark straight from the bowels of hell. We loved the “girls”; they were very intelligent, active and protective (and seemed to delight in sneaking up behind us and barking deeply once, for the effect – I am sure it amused them):
This model is as close to the actual basset hound shape as I have found folded from paper, and the colour changes make this model actually closely resemble one of our bassetts named “Cleo” – lovely dog. The stance is really typical and the placement/proportion of the ears and head are spot on.
Folded from white/natural duo Ikea Kraft, it is a challenging model because of a number of judgement fold steps and some tricky shaping, but i am happy with the result (and hope mum likes it, a gift for her).
